United States

Metal Emergency? 630-884-4249

Powder Transfer Magnet Logo

USDA Dairy Certified Magnet for Sensitive Powder Transfer Lines

The Powder Transfer Magnet is a high-intensity, sanitary design magnetic separator, engineered specifically for sensitive powder applications such as in dairy, nutraceutical, and pharmaceutical plants. This separator features high-intensity Acutex Probe Magnets configured to remove even the smallest and weakly-magnetic fragments (including work-hardened stainless steel fragments) in high-velocity pneumatic convey lines.

Key Features & Benefits

Key Features

  1. Acutex™ Magnetic Probe – aerodynamic directional magnet with positioning key.
  2. Tethered Handle – for operator safety.
  3. Locking Access Tabs – for operator safety (alternative tool access fittings available).
  4. Aerodynamic Bellied Housing – for minimal pressure change in powder transfer lines.
  5. Sanitary Fittings Inlet/Outlet – a selection of fittings for standard lines sizes including 2”, 3” & 4”.

Additional Features

  • Large Retention Zone – for effective separation of weakly-magnetic materials including work-hardened stainless steel fragments.
  • RE80® Magnet Technology – for industry-leading magnet strength retention over time.
  • High-intensity Magnets – certified to minimum 11,000+ gauss.
  • Dura-Slik® Abrasion-Reduction Technology – to reduce wear in abrasive applications, as well as increasing flowability of hydroscopic or sticky powders.

Power of Comparison

The Powder Transfer Magnet design provides significant advantages vs. alternative designs.

The Powder Transfer Magnet incorporates key design features of the Spherical™ Pneumatic-Line Magnet providing highly efficient separation of metal fragment contamination without experiencing bulk density or blockage problems.

Designed for sensitive dairy and powder applications such as pharmaceutical powders and infant formulas, but also successful in highly abrasive applications such as sugar. Can handle Powders of up to 0.6″ (16 mm) particulate.

The Powder Transfer Magnet’s compact design makes it easy to install into your existing process. Whether you’re fitting a magnetic separator into an existing process, or specifying it into a new build, the compact design and range of connection fittings make it easy to implement. Specify your fitting of choice on the magnet inlet and outlet. (Morris coupling, tri-clover, Tuf-lok, camlock, or a combination of these).

Reduced risk of re-contamination. Engineered with large diameter high-intensity Acutex™ Probes positioned transverse to the product flow, the Powder Transfer Magnet has an unmatched capability to capture and retain even the smallest, dust-sized metal fragments including work-hardened stainless-steel.  In comparison, Bullet Magnets and other pneumatic-line magnets have a flat base or flat raised poles which lack the ability to retain weakly magnetic fragments, therefore risk being dislodged and re-entering the product flow.

Certified USDA DAIRY GRADE

Fully compliant with HACCP International MAGSEP Standard

Patents approved and patents pending

Related Videos

Product Overview

Case Study

Case Study

What Our Customers Say

General 11

Magnattack is terrific. Great customer service, speedy results and has someone out here quickly when we need them.

John Bushman

General 10

Very prompt responses, I wish more suppliers worked with this sense of urgency in this day and age!!!

Greg

General 9

We finally got the window to install the magnet and all is well. The quality of your product is first rate in my opinion, and I thank you for all your support during the application selection and purchase process.

Dave Cimbora
HIS Maintenance Coordinator / MARS / Wrigley

General 8

"17 years ago, MAGNATTACK™ supplied us with one of their Spherical Pneumatic transfer magnets. After all this time, the magnet is still > 10,000 gauss, similar strength to what it was on supply. We test the magnet strength on a regular basis to ensure it is performing at the design level to ensure we maintain the highest level of Food Safety. Having worked with the team at MAGNATTACK many times, I find MAGNATTACK™ to be a very helpful, responsive organisation, which has provided a professional, high level of personal service when needed, along with providing practical solutions specific to our need for metal fragment control. I have no hesitation in recommending MAGNATTACK™ to my counterparts within Aryzta or within the food industry.”

Norm Cuthbert
Engineering Support Manager / Aryzta

General 7

“We discovered the Mag-Ram after looking at ways to remove metal from meals and to assure our pet food customers that the meals were of highest quality. When we looked around at all the options we found that the Mag-Ram was the best because it is self-cleaning and it saves operators time and it gives us the assurance that we’re not sending metal to our customers. One of the benefits of this system is that we’ve got peace of mind of knowing that our products going to pet food and agriculture are not going to be facing claims from metal and problems we send the customer. The business is too valuable to risk sending a problem to the other side of the world and then trying to sort the problems out later. It is better to make sure the problems don’t leave our premises.”

Warren McLean

General 6

"Our company is committed to quality. When we required less magnetic stone fragments in our grain, we needed more gauss than can currently be obtained with a rare earth magnetic drum. We found a solution that exceeded our expectations by installing a Mag-Ram Self-Cleaning Magnetic Separator. With the 10,000 gauss magnets, a great deal more magnetic stone and magnetic rock dust is extracted. We are very impressed with this installation and the high level of expertise and service from the manufacturer, Magnattack™ Global. Highly recommended quality.”

Stewart Harper
Fosters Group Limited at Cascade Brewery / Hobart, Tasmania Australia

General 5

“We use the Liquid Pressure Pipeline Separator in our meet processing plant. We are very pleased with them... three things: Number 1. THEY WORK. We had some paddles that got smashed that were impregnated with metal. When we gathered all the broken pieces and put them together, your separator captured 100% of the fragments...that's never happened before! Number 2. EASY TO CLEAN, and - Number 3. EASY TO HANDLE - the operators love them!”

Plant Manager / Waco, TX, USA

General 4

“Our The Mag-Stride Magnetic Mat is great - we are catching some fine shavings and metal fragments, it also makes for a great talking point whenever we have visitors or auditors come through - overall, we are impressed and pleased with our purchase, Thank you again!”

QA Supervisor / Yuba City, CA, USA

General 3

"We have been working with MAGNATTACK™ for the past decade and have installed multiple MAG-RAM™ self-cleaning grate magnets throughout our plants. These units have proved very useful in reducing downtime caused by damage to equipment, as well as a huge timesaver for operators cleaning magnets. The system has also enabled us to clean instream without stopping the process to clean the magnets. This method has proved more efficient to other magnetic separators because a clean magnet is constantly being presented to the products being processed. This is a highly effective innovation, recommended for bulk material processing."

BRENDAN BREUST

General 2

"Since 2004 Magnattack Global has provided us with solutions to metal fragment control in both supply of equipment and yearly magnet validations. Magnattack is a source of exceptional quality separation systems and manufactured innovative answers to metal fragment control. In 2006 Magnattack adapted a MAG-RAM™ Self-Cleaning Magnet System to a difficult location above our SAPAC Machine. This has provided the separation qualities required and the assurance that a clean magnet is presented to the product with regular cleaning cycles. The most innovative function of this unit is its ability to clean one ram at a time providing good coverage of product to magnet during its cleaning cycle. Magnattack over the years has also provided magnet solutions for our pneumatic transfer lines, gravity powder lines and liquid lines. We are very impressed with MAGNATTACK"s high level of expertise, on-site presence and service to the dairy industry, and would have no hesitation in recommending their innovative magnetic separator solutions for sanitary dairy applications.”

Brian Winterton
Technical Quality Manager / Murray Goulburn – Rochester, VIC

General 1

"We experienced customer issues with metal including drenching capsule spring pieces. MAGNATTACK™ Global assisted us and came up with the MAG-RAM™ system which allowed us to remove these metal contaminants and I have no hesitation in recommending this equipment to the rendering industry. It has been a great investment which has undoubtedly proved its worth over three years. There has been negligible maintenance. I must say the MAG-RAM™ Self-Cleaning Separator has given us assurance that we have a safer, much cleaner and more valuable product than before. Highly recommended innovation!"

Scott Newton

Compliance & Certifications

HACCP Logo
USDA Logo
FDA Logo
CE Logo